[TUT] How to install lights in your Xbox 360 console.
2 posters
Author
Message
bmartin1207 Forum Nub
Posts : 7 Join date : 2011-10-17
Subject: [TUT] How to install lights in your Xbox 360 console. Tue Oct 18, 2011 7:10 pm
Alot of people are afraid to install LEDs because they dont know where to solder the wires or are just plain afraid to kill their 360. Its actually very easy to do. Here is a little tutorial for you to follow. Here is what your Xbox can look like after following this guide!
Items Needed 1. Soldering Iron 2. Solder 3. Electrical Tape
Your wires will either be BLACK and RED or BLACK and YELLOW.
On the picture below you will see where I soldered the black and yellow wires. Now if you have a red wire you will want to solder it where I placed the red dot on the right. All soldering is done on the back of the motherboard. After you solder the wires to the board make sure you cover them with the electrical tape.
[You must be registered and logged in to see this image.] Yellow=12v Red=5v Black=ground
After you are done you should have something like this.